What is a cognitive aptitude test? A complete guide to Logics
Logics is Assessio’s cognitive aptitude test. This guide explains what it measures, how it’s built, and what to expect whether you’re evaluating it for your organisation or about to take it yourself.
Cognitive aptitude tests and Logics: the basics
What is a cognitive aptitude test?
A cognitive aptitude test is a timed set of reasoning tasks, usually covering things like verbal, numerical, and abstract reasoning, designed to measure general mental ability rather than job-specific knowledge. It doesn’t ask what you know. It asks how well you think when faced with something new.
This distinction matters in hiring. A knowledge test tells an employer what a candidate has already learned, and a personality test tells them how a candidate tends to behave. A cognitive aptitude test, sometimes called a cognitive ability test, tells them something different again: how a candidate is likely to learn, adapt, and solve problems once they’re on the job. That’s why it’s often used alongside the other two rather than in place of them.
What is Logics?
Logics is a classical speed test that measures General Mental Ability (GMA) along with several more specific cognitive abilities. It consists of 80 items to be completed within a 30-minute time limit, and you’re free to navigate between items, skip anything, and come back to it, in whatever order suits you.
That design sets Logics apart from Matrigma, Assessio’s other cognitive assessment. Matrigma is adaptive and fully non-verbal, with no fixed order. Logics is primarily a speed test: most individual items are relatively easy to solve, and rather than escalating difficulty as you go, it challenges you with volume against a fixed clock.
What does Logics measure?
Logics produces one overall General Mental Ability score, called Cognitive Capacity, plus eight more specific scores grouped into four domains.
Cognitive Capacity — your overall GMA score, an equal-weighted combination of speed and accuracy across the whole test. This is the closest thing to a single headline number.
The eight specific scores break down into four domains:
Learning Capability — how well you solve new, unfamiliar problems when given the time to work through them.
Decision style — Speed (how many tasks you attempted) and Accuracy (how many of those attempts were correct), read together rather than in isolation.
Logical capacity — your fluid intelligence, split into Perception (spotting patterns, the least language-dependent of the five ability areas), Analysis (systematic reasoning, more verbal in nature), and Complexity (handling a lot of information at once).
Skills — your crystallised intelligence, split into Numerical and Verbal reasoning, which draw on acquired knowledge.
Test format at a glance
80 items, 30-minute time limit
Free navigation — skip, revisit, and reorder items as you like
No time limit per item, but total time and pace per scale are tracked
Scored 0–10 (C score) on each of the nine scales, grouped into low, moderate, and high bands
Available in 15 languages
Automatic results overview provided immediately after completion
Logics for HR leaders and hiring managers
Why choose Assessio’s Logics
Logics is built on the same theoretical foundation as long-established tools like Raven’s Progressive Matrices and the WAIS: Spearman’s g-factor, Cattell’s split between fluid and crystallised intelligence, and the Cattell-Horn-Carroll theory of cognitive abilities that ties them together. Raven’s and the WAIS are used in business settings too, but recruitment wasn’t the original brief for either. Logics was designed with recruitment as an explicit requirement from the outset, and it also reports learning capability and decision style, which are particularly useful in a business context.
Key advantages
Granular insight — nine scores instead of one, so you can understand a candidate’s specific strengths rather than a single overall level. Use the overall score for decisions and the sub-scores to explore strengths in the interview.
Business-relevant — designed for business use from the outset, around real hiring needs (the original development process included a study of 50 Danish companies).
Research-backed — built on General Mental Ability, one of the most extensively studied predictors of training outcomes and job performance in the occupational psychology literature, with Logics itself validated against established tests like Raven’s Progressive Matrices.
Patterns by job level and education — in Assessio’s data, executives and specialists tend to score higher than employees, and scores rise with education.
Who Logics is designed for
Logics is suitable for salaried employees and above, aged 18 to 70. It’s particularly relevant for specialist and management-level roles and for positions of medium-to-high complexity, where the ability to reason through unfamiliar problems matters more than in simpler, more routine work. Logics is not intended for clinical or diagnostic use.
The science behind Logics
Logics correlates with the overall GMA score in Raven’s Progressive Matrices (r = .62, with 99 participants), one of the most established intelligence tests in research use, which supports the case that Logics is measuring the same underlying construct as tools with a much longer research history. It also shows the relationships you’d expect against Adaptive Matrigma: stronger correlations with the fluid-intelligence side of Logics (Learning Capability and Logical capacity) and weaker correlations with the crystallised-intelligence side (Skills), consistent with the fact that Matrigma is a purely non-verbal test.
Scores are compared with a 2025 global norm of 10,168 candidates from 126 nationalities, most of whom have a bachelor’s degree or higher. This matters for interpretation: candidates without degrees are compared with a highly educated group. For reliability, construct validity and norm-group details, see the Logics Technical Manual.
Logics vs. Matrigma — which should you use?
Matrigma’s 12-minute, fully non-verbal, adaptive format makes it well suited to broad, high-volume selection where minimal language dependency matters. Logics takes longer and asks more of the reader in return: a much more detailed nine-score profile, better suited to specialist and management hiring where a nuanced read on someone’s reasoning style, learning capability, and decision style adds real value.
The two are validated as measuring a related but not identical construct. Their GMA scores correlate moderately with each other, which means they’re complementary tools rather than interchangeable ones, and the right choice comes down to how much depth your hiring decision needs versus how much speed and language-neutrality it requires.
Fairness and cheating prevention
In Assessio’s analyses, Logics shows no adverse impact by gender, even at strict cut-offs. Strict or moderate fixed cut-offs can, however, disadvantage candidates over 40 on Cognitive Capacity, Speed, Perception, Complexity and Numerical. We recommend avoiding strict fixed cut-offs and combining Logics with other assessment information rather than basing a decision on any single score in isolation. That combination approach is the same principle that underpins fair use of any cognitive test: a score is one input, not a verdict.
On cheating, Assessio recommends completing Logics in a supervised or controlled setting where possible. Assessio’s own data show that Numerical scores are noticeably higher when the test is taken at home than when it’s supervised. The test draws on a large item pool, so repeat test-takers don’t see identical questions. Assessio monitors score trends every quarter to detect any impact from AI tools, and so far has found no sign of widespread cheating. We’ve written about this in far more depth in our report on how we approach faking and cheating in assessments.
The Logics Report
The Logics Report is a downloadable PDF summary of a candidate’s full Logics results, including main scores, sub-scores, and response pattern. It’s available in a simplified or full-profile view, designed so you can reference results during an interview without needing a laptop open.
Taking the Logics test: a candidate’s guide
Why you’ve been asked to take Logics
If you’ve been asked to complete Logics, it’s typically because you’re being considered for a specialist or management-level role. It’s one input into a hiring decision alongside interviews and other assessments, not a stand-alone pass-or-fail gate. Employers use it to understand how you reason and learn, which is genuinely hard to assess from a CV or a single conversation.
What to expect: step by step
You’ll choose your preferred language first, and it can’t be changed once you’ve started, so pick carefully. After that, you’ll get a short introduction to navigation, followed by three practice items, before the real test begins. From there, you’ll answer up to 80 items over 30 minutes, moving freely between them in whatever order you like. The test must be done in one session, and the timer keeps running if you’re interrupted. If you finish before the 30 minutes are up, a few bonus points are added to your overall score. Once you finish, you’ll get an automatic results overview straight away.
We’d recommend completing the test somewhere quiet and undisturbed. Pen and paper is the only aid allowed.
How long does it take, and is it timed?
The full set of 80 items has a 30-minute time limit. There’s no time limit on individual items, but your pace within each scale is tracked and shown in your results. That means your results don’t just show whether you finished. They show how you paced yourself along the way, which is useful information in its own right rather than something to worry about.
How is Logics scored?
Each of the nine scales is scored on a 0–10 scale, called a C score, and grouped into low, moderate, and high bands. No single score defines you. The scores are meant to be read together, as a profile, rather than picked apart one at a time.
Is it fair if English isn’t my first language?
Logics includes verbal and numerical content, unlike Matrigma, so results can be affected by completing the test in a non-native language, or by dyslexia or dyscalculia. If your native language is available, we’d recommend choosing it. Employers using Logics are expected to take this context into account when interpreting your results, rather than reading a lower verbal score in isolation.
What languages is the test available in?
Logics is currently available in 15 languages. For the full list, see the Logics help centre →
What happens after you finish
You’ll get an automatic results overview as soon as you complete the test. From there, your results are typically discussed further with a recruiter, or in a dedicated feedback session, as one part of the overall hiring process rather than the whole of it.
Taking Logics soon?
Our candidate resources cover what to expect from Assessio assessments and how to prepare on the day. Read the candidate resources →
People data you can trust
See why thousands of organisations around the world use Assessio to unlock their full potential.
Logics FAQ
What is the Logics test?
Logics is Assessio’s cognitive aptitude test. It’s a classical speed test that measures General Mental Ability alongside eight more specific scores covering Learning Capability, Decision style, Logical capacity, and Skills.
What does Logics measure?
One overall GMA score, called Cognitive Capacity, plus eight more specific scores across four domains: Learning Capability, Decision style (Speed and Accuracy), Logical capacity (Perception, Analysis, Complexity), and Skills (Numerical and Verbal).
How long does the Logics test take?
Up to 30 minutes for the full set of 80 items. There’s no per-item time limit.
What’s the difference between Logics and Matrigma?
Matrigma is a 12-minute, fully non-verbal, adaptive test. Logics is a 30-minute fixed-length test that includes verbal and numerical content and produces a more detailed nine-scale profile. They measure a related but not identical construct.
Is there a right or wrong answer on Logics?
Each item has a correct answer, since it’s a cognitive ability test rather than a personality questionnaire, but the scales are meant to be read together as a profile rather than picked apart one at a time.
Is Logics fair for non-native speakers, or people with dyslexia or dyscalculia?
Because Logics includes verbal and numerical content, results can be affected by non-native language completion, dyslexia, or dyscalculia. Choosing your native language where available is recommended, and employers are expected to account for this context when interpreting results.
What languages is Logics available in?
The assessment is currently available in 15 languages:
- Danish (DK)
- Dutch (NL)
- English (GB)
- English (US)
- Estonian (ET)
- Finnish (FI)
- French (FR)
- German (DE)
- Italian (IT)
- Latvian (LV)
- Lithuanian (LT)
- Norwegian (NO)
- Polish (PL)
- Spanish (ES)
- Swedish (SV)
What is the Logics Report?
A downloadable PDF summary of a candidate’s full Logics results, available in a simplified or full-profile view, designed so recruiters can reference results during an interview without needing a laptop open.
Who is Logics designed for?
Salaried employees and above, aged 18 to 70, particularly for specialist and management-level roles or positions of medium-to-high complexity. It’s not intended for clinical or diagnostic use.
Related resources
What is a values test? A complete guide to MATCH-V
What is a values test, and how does MATCH-V work? See how it measures culture fit and motivation.
The MAP test explained: a complete guide to Assessio’s personality assessment
What is a psychometric test, and how does MAP work? See what it measures, how it’s scored, and what to expect.
What is employment screening? A complete guide to MAP Essence
What is employment screening, and how does MAP Essence work? See what it measures and how it’s used.